openmoko

gpio-s3c6410.c (set_h): changed "dat" offset from 4 to 8 (by Andy Pevy)

Fri, 23 Dec 2011 23:57:19 +0000

Commit by werner :: r6008 /trunk/src/target/gpio/gpio-s3c6410.c: (link)

gpio-s3c6410.c (set_h): changed "dat" offset from 4 to 8 (by Andy Pevy)

gpio-s3c6410.c (set_h): correct offset of pull-up register (by Andy Pevy) Andy...

Fri, 23 Dec 2011 17:36:01 +0000

Commit by werner :: r6007 /trunk/src/target/gpio/gpio-s3c6410.c: (link)

gpio-s3c6410.c (set_h): correct offset of pull-up register (by Andy Pevy)

Andy wrote:

  In the set_h function, the offset used for calculating the pud
  register address is set to 8 but the actual offset for the 3 registers
  that use the function (GPIO ports H, K and L) should be 0x0C.

  I have changed my code and I can now successfully use port K
  on my application.

fped: mechanical holes had incorrect layers - inst.c (inst_hole): set...

Thu, 24 Mar 2011 23:42:50 +0000

Commit by werner :: r6006 /trunk/eda/fped/ (inst.c layer.c): (link)

fped: mechanical holes had incorrect layers

inst.c (inst_hole): set inst->u.hole.layers, not inst->u.pad.layers
layer.c (mech_hole_layers): holes don't need solder paste

fpd.y: dump() requires a dummy "one" argument here too, oops

Wed, 23 Mar 2011 08:25:23 +0000

Commit by werner :: r6005 /trunk/eda/fped/fpd.y: (link)

fpd.y: dump() requires a dummy "one" argument here too, oops

hack: set errno to ENOENT when -1 fails, so that the error isn't too ugly The...

Wed, 23 Mar 2011 08:07:32 +0000

Commit by werner :: r6004 /trunk/eda/fped/postscript.c: (link)

hack: set errno to ENOENT when -1 fails, so that the error isn't too ugly

The caller assumes that any error would be signaled via errno. A proper
solution would be to allow also for non-errno errors.

fped: added option -1 package to select a single package to output with -p/-P

Wed, 23 Mar 2011 07:14:14 +0000

Commit by werner :: r6003 /trunk/eda/fped/ (9 files): (link)

fped: added option -1 package to select a single package to output with -p/-P

fped: don't output pad names consisting only of spaces Such names have an...

Wed, 23 Mar 2011 06:45:09 +0000

Commit by werner :: r6002 /trunk/eda/fped/postscript.c: (link)

fped: don't output pad names consisting only of spaces

Such names have an invalid size and may trip the Postscript/PDF interpreter.

postscript.c (ps_pad_name): don't output names consisting only of spaces

boom: order component references correctly - misc.pl (cmp_cref): helper function...

Tue, 22 Mar 2011 23:16:16 +0000

Commit by werner :: r6001 /trunk/eda/boom/ (misc.pl part2order prettyord): (link)

boom: order component references correctly

misc.pl (cmp_cref): helper function to order component references by name and number
part2order: sort component references using cmp_cref
prettyord: sort component references using cmp_cref

prettyord: added SMT fab type BOM output - prettyord: new option -f to generate...

Tue, 22 Mar 2011 22:03:53 +0000

Commit by werner :: r6000 /trunk/eda/boom/prettyord: (link)

prettyord: added SMT fab type BOM output

prettyord: new option -f to generate SMT fab output
prettyord: new option -c to generate CSV output
prettyord: new option -r to sort by component reference (instead of part number)
prettyord (usage): added description of options

- gui.c (change_world_reselect): take into account that we may get called with a...

Sat, 22 Jan 2011 00:54:57 +0000

Commit by werner :: r5999 /trunk/eda/fped/gui.c: (link)

gui.c (change_world_reselect): take into account that we may get called with a selected object but no selected instance. In this case, don't try to re-select. (Not perfect, but better than the crash this caused so far.)

Added a new pad type: trace pads, for antennas and other trace-like elements. -...

Tue, 18 Jan 2011 00:30:59 +0000

Commit by werner :: r5998 /trunk/eda/fped/ (11 files): (link)

Added a new pad type: trace pads, for antennas and other trace-like elements.

layer.h (enum pad_type): added pad type pt_trace
layer.c (pad_type_to_layers, layers_to_pad_type), inst.c (inst_pad): "trace" pad instantition and conversion infrastructure
fpd.y (pad_type), dump.c (print_obj): .fpd file I/O for "trace" pads
postscript.c (prologue): added Postscript function "horpath" to produce horizontal stripes
postscript.c (hatch): show "trace" pads with horizontal stripes
gui_style.h (gc_pad_trace), gui_style.c (gc_pad_trace, gui_setup_style), gui_inst.c (pad_gc): added visualization of "trace" pads
gui_status.c (show_pad_type): added "trace" pad type
README: added description of "trace" pads
README: added usage examples for the various pad types

- test/tsort: "Aborted" doesn't get reported on all platforms, so we just remove...

Fri, 10 Dec 2010 06:56:45 +0000

Commit by werner :: r5997 /trunk/eda/fped/test/tsort: (link)

test/tsort: "Aborted" doesn't get reported on all platforms, so we just remove it completely (reported by Nobuhiro Iwamatsu)

Accept "#" as comment character in gnuplot data files. Misread the documentation...

Mon, 01 Nov 2010 22:54:40 +0000

Commit by werner :: r5996 /developers/werner/cncmap/ (3 files in 3 dirs): (link)

Accept "#" as comment character in gnuplot data files.

Misread the documentation - on Unix, only # is a valid comment character in
gnuplot data files. So we treat it as such now.

gp2rml/gp2rml.c (process_file), zmap/main.c (process_file), align/align.c (process_file): accept "#" as comment character (in addition to "!")

spool/spool.c: allow overriding of serial port with environment variable PORT

Mon, 01 Nov 2010 02:59:23 +0000

Commit by werner :: r5995 /developers/werner/cncmap/spool/spool.c: (link)

spool/spool.c: allow overriding of serial port with environment variable PORT

The box coordinates were not properly initialized in gui_draw_pad_text -...

Sun, 31 Oct 2010 12:11:20 +0000

Commit by werner :: r5994 /trunk/eda/fped/gui_inst.c: (link)

The box coordinates were not properly initialized in gui_draw_pad_text

gui_inst.c (gui_draw_pad_text): box_min and box_max were initialized to an undefined value, upsetting valgrind and yielding an incorrect location if pad and hole had the same size

cncmap/Makefile: added "master" Makefile to build all the cncmap utilities

Sun, 31 Oct 2010 01:34:53 +0000

Commit by werner :: r5993 /developers/werner/cncmap/Makefile: (link)

cncmap/Makefile: added "master" Makefile to build all the cncmap utilities

New tool "boom testsub" to process .sub rules on a set of parameters. Example:...

Mon, 25 Oct 2010 01:10:14 +0000

Commit by werner :: r5992 /trunk/eda/boom/ (parser.pl testsub): (link)

New tool "boom testsub" to process .sub rules on a set of parameters.

Example:
boom testsub atrf.sub VR3 5V6 0402

parser.pl: reset $mode globally so that we can call &parse_one directly
testsub: new tool to debug .sub rules. Option -d to print rules processing.

"Footprint" and "FP" were switched in table (reported by Wolfgang Spraul)

Sun, 24 Oct 2010 11:39:48 +0000

Commit by werner :: r5991 /trunk/eda/boom/README: (link)

"Footprint" and "FP" were switched in table (reported by Wolfgang Spraul)

Added interactive query mode (-q word) to gen2chr. - boom/gen2chr: added proper...

Mon, 18 Oct 2010 19:55:38 +0000

Commit by werner :: r5990 /trunk/eda/boom/gen2chr: (link)

Added interactive query mode (-q word) to gen2chr.

boom/gen2chr: added proper command-line parsing so that -d and -n can now be in any order
boom/gen2chr: moved part name translation to separate function "translate"
boom/gen2chr: added new option -q to translate a word passed on the command line

Changed "reference number" to more consistent "part number" (reported by...

Mon, 18 Oct 2010 01:42:27 +0000

Commit by werner :: r5989 /trunk/eda/boom/README: (link)

Changed "reference number" to more consistent "part number" (reported by
Wolfgang Spraul)